石田 倫教 (イシダ トシノリ)

工学研究院 応用量子科学部門 物質量子工学特任助教
Last Updated :2025/02/13

■研究者基本情報

学位

  • 博士(工学), 北海道大学, 2018年03月

Researchmap個人ページ

研究者番号

  • 30997680

研究キーワード

  • 量子ビーム
  • 中性子小角散乱
  • X線小角散乱
  • 電子顕微鏡
  • 鉄鋼材料
  • 燃料電池
  • 食品科学

研究分野

  • ライフサイエンス, 食品科学, 食品構造
  • ナノテク・材料, 構造材料、機能材料
  • ナノテク・材料, 材料加工、組織制御
  • エネルギー, 量子ビーム科学

担当教育組織

■経歴

経歴

  • 2024年02月 - 現在
    北海道大学, 大学院工学研究院, 特任助教
  • 2021年07月 - 2024年01月
    株式会社本田技術研究所, 先進パワーユニット・エネルギー研究所 エネルギーユニット開発室第3ブロック
  • 2018年04月 - 2021年06月
    JFEスチール株式会社スチール研究所, 分析・物性研究部, 研究員

学歴

  • 2015年04月 - 2018年03月, 北海道大学, 大学院工学院, 量子理工学専攻, 博士後期課程
  • 2013年04月 - 2015年03月, 北海道大学, 大学院工学院, 量子理工学専攻
  • 2009年04月 - 2013年03月, 北海道大学, 工学部, 機械知能工学科
  • 2006年04月 - 2009年03月, 愛知県立一宮高等学校, 普通科

委員歴

  • 2024年04月 - 現在
    軽金属学会, 7000系アルミニウム合金の時効硬化挙動研究部会 委員, 学協会
  • 2024年04月 - 現在
    日本鉄鋼協会 評価・分析・解析部会, 接合・リサイクル技術へのフルパワー中性子線の活用 フォーラム メンバー, 学協会
  • 2020年04月 - 2021年06月
    日本鉄鋼協会 評価・分析・解析部会, 結晶性材料のマルチスケール解析 フォーラム メンバー, 学協会

■研究活動情報

受賞

  • 2024年11月, 軽金属学会 第147回秋期大会, 優秀英語ポスター発表賞               
    ラボサイズX線小角散乱法を用いたA2618合金とA2024合金の高温特性評価
    福田深;大沼正人;石田倫教;愛須優輝;田中宏樹;一谷幸司
  • 2024年11月, XIX International Small Angle Scattering Conference (SAS2024), Silver Poster Award               
    Effect of thermal history on aging behavior of 7000 series aluminum alloys from -10 to 200 °C
    T. Ishida;T. Suzuki;M. Mihara-Narita;H. Yoshida;S. Kuramoto;M. Ohnuma
  • 2022年11月, 日本ばね学会, 技術賞               
    高Si含有中炭素マルテンサイト鋼の機械特性に及ぼすFe炭化物の影響
    寺本真也;井村政仁;増田優起;石田倫教;大沼正人
  • 2018年08月, 食品科学工学会, 第65回大会 第14回若手の会 ポスター賞               
    乳製品のナノ構造解析
    那須田祐子;大沼正人;古坂道弘;石田倫教
  • 2017年12月, 日本中性子科学会, 第17会年会 ポスター賞               
    北海道大学におけるSANS装置iANSを用いた金属材料測定の技術開発
    石田倫教, 大沼正人, 古坂道弘
  • 2017年07月, International Conference on Neutron Scattering 2017, Best Poster Award               
    Data Reduction and Instrumentation Towards Accurate Absolute Intensity for the TOF-SANS Instrument (iANS) at the Compact Accelerator Driven Neutron Source at Hokkaido University
    T. Ishida, M. Ohnuma, M. Furusaka
  • 2015年03月, 日本原子力学会, 平成26年度フェロー賞               
    石田倫教
  • 2015年03月, 日本鉄鋼協会, 第169回講演大会学生ポスターセッション最優秀賞               
    小角散乱及び透過型電子顕微鏡による高窒素マルテンサイトステンレス鋼の微細組織解析
    石田倫教, 大沼正人, 佐藤博隆, 古坂道弘, 平徳海, 阿部太一

論文

  • 高Mnオーステナイト鋼における溶接熱影響部の極低温靭性支配因子
    植田 圭治, 泉 大地, 髙田 充志, 石田 倫教, 伊木 聡, 山下 正太郎, 小椋 智, 才田 一幸
    溶接学会論文集, 38, 4, 211, 221, 一般社団法人 溶接学会, 2021年
    日本語, High Mn austenitic steel is expected to be a next-generation structural material for cryogenic use by maintaining a stable fcc crystal structure even at cryogenic temperatures by adding a large amount of Mn which are γ-stabilizing elements. In order to clarify the factors governing the cryogenic toughness of heat affected zone (HAZ) of welds, investigation of relationship between microstructure and Charpy impact toughness of multi-pass weld joint and a simulated thermal cycle test was conducted for high Mn steel containing 0.5%C-25%Mn-5%Cr. In the MAG welding, HAZ near fusion line showed high absorbed energy, whereas it was minimized at HAZ5mm reheated up to around 1073K. Furthermore, in a simulated thermal cycle test of continuous cooling, the absorbed energy was also minimized at 1073K. On the other hand, in the simulated thermal cycle test of quenching, the inverse dependence of the grain size on a conventional steel was shown, and the toughness increased as the grain size became coarse. Grain growth occurs according to the maximum temperature of HAZ, and M23C6 is formed on the grain boundary in the subsequent continuous cooling process. It was clarified that M23C6 became only initiation site of fracture under Charpy impact loading, and its existence density was the main factor of initiation energy. On the other hand, propagation process is a ductile fracture phenomenon in which γ stability is maintained regardless of the presence of M23C6.
  • 高Mnオーステナイト鋼における時効熱処理後のシャルピー靭性変化と炭化物析出の影響
    植田 圭治, 泉 大地, 石田 倫教, 山下 孝子, 髙田 充志, 伊木 聡, 山下 正太郎, 小椋 智, 才田 一幸
    溶接学会論文集, 38, 4, 199, 210, 一般社団法人 溶接学会, 2021年
    日本語, High-Mn austenitic steel is expected to be a next-generation structural material for cryogenic use by maintaining a stable fcc crystal structure even at cryogenic temperature by adding a large amount of C and Mn which are γ-stabilizing elements. In some cases, Cr is added together with C as a solid solution strengthening element to the high-Mn austenitic steel. Depending on the conditions of aging heat treatment, the formation of Cr carbide may affect the mechanical properties. In this study, the formation behavior of Cr carbide and the effect on cryogenic Charpy impact toughness in the aging heat treatment at from 773 to 1273K for 30s to 18ks of a high-Mn austenitic steel with 0.5%C-25%Mn-5%Cr. Regardless of the aging heat treatment conditions, no cleaved but 100% ductile fracture surface was observed in all samples after the Charpy impact test at 77K. On the other hand, M23C6 containing Cr was formed on the austenite grain boundaries in the sample aged for a long time at 1073K, and the Charpy absorbed energy showed lower than those of the other aging conditions. As the results of both detailed microstructure observation of M23C6 and adjacent austenite matrix and DICTRA simulation, it was clarified that M23C6 mainly act as a fracture initiation point but propagation to the matrix becomes ductile because no sharp alloy deficiency layer is formed at the M23C6 / austenite matrix interface. As a result of calculation of stacking fault energy using a thermochemical model, it was confirmed that γstability at cryogenic temperature could be sufficiently secured even in the alloy-deficient region near M23C6 as well as in the stable matrix.
  • Effect of alloying element on mechanical properties of high strength austenitic steel
    Keiji Ueda, Daichi Izumi, Toshinori Ishida, Yoshiaki Murakami
    Materials Science Forum, 1016 MSF, 678, 684, 2021年
    研究論文(国際会議プロシーディングス), A high strength austenitic steel is expected as a structural material for cryogenic use because fcc material does not cause a cleavage fracture despite high strength. High manganese steel which is a strong candidate material of the cryogenic high strength austenitic steel was originally famous for the Hadfield steel and widely applicable in actual use. In general, an excellent cryogenic toughness of the high manganese steels is achieved by obtaining stable fcc microstructure with an adequate amount manganese which is a typical austenite former alloy. However, as addition of manganese is not effective for increasing strength, other strengthening alloying elements like carbon and chromium need to be added. In this study, an effect of alloying elements on strength and cryogenic toughness of the high manganese austenitic steel is studied.
  • Influence of iron carbide on mechanical properties in high silicon-added medium-carbon martensitic steels
    Shinya Teramoto, Masahito Imura, Yuki Masuda, Toshinori Ishida, Masato Ohnuma, Yutaka Neishi, Takahisa Suzuki
    ISIJ International, 60, 1, 182, 189, 2020年
    研究論文(学術雑誌), Using a medium-carbon steel containing 2 mass% Si, we investigated the effect of its tempered martensite microstructure on its mechanical properties. We found that the tensile strength of tempered martensite continuously decreases with increasing tempering temperature and that its yield strength markedly decreases in a tempering temperature range of 673 K to 723 K. To investigate the correlation with the microstructure, we examined the effect of tempering temperature on the microstructure by SEM and TEM and identified Fe carbide phases by TEM nanobeam diffraction pattern analysis and X-ray diffractometry. In the tempering temperature range where the yield strength significantly decreases, the morphology of the ε carbide precipitated in martensite blocks changed from platelike to granular and the χ carbide was precipitated in a small amount in the samples tempered at 723 K. SAXS quantitative evaluation of the ε carbide revealed that the decrease in the size and volume fraction of the ε carbide with the increase in the tempering temperature was far greater than with the samples tempered at 673 K and below. The sharp decrease in the yield strength was suggested to be correlated with the increase in the mobility of dislocations with the decrease in the precipitate volume fraction resulting from the dissolution of ε carbide in the transformation process of the Fe carbides.
  • 高Si含有中炭素マルテンサイト鋼の機械特性に及ぼすFe炭化物の影響
    寺本 真也, 井村 政仁, 増田 優起, 石田 倫教, 大沼 正人, 根石 豊, 鈴木 崇久
    鉄と鋼, 106, 3, 165, 173, 一般社団法人 日本鉄鋼協会, 2020年
    日本語, Using a medium-carbon steel containing 2 mass% Si, we investigated the effect of its tempered martensite microstructure on its mechanical properties. We found that the tensile strength of tempered martensite continuously decreases with increasing tempering temperature and that its yield strength markedly decreases in a tempering temperature range of 673 K to 723 K. To investigate the correlation with the microstructure, we examined the effect of tempering temperature on the microstructure by SEM and TEM and identified Fe carbide phases by TEM nanobeam diffraction pattern analysis and X-ray diffractometry. In the tempering temperature range where the yield strength significantly decreases, the morphology of the ε carbide precipitated in martensite blocks changed from platelike to granular and the χ carbide was precipitated in a small amount in the samples tempered at 723 K. SAXS quantitative evaluation of the ε carbide revealed that the decrease in the size and volume fraction of the ε carbide with the increase in the tempering temperature was far greater than with the samples tempered at 673 K and below. The sharp decrease in the yield strength was suggested to be correlated with the increase in the mobility of dislocations with the decrease in the precipitate volume fraction resulting from the dissolution of ε carbide in the transformation process of the Fe carbides.
  • 乳製品のナノ構造解析
    那須田 祐子, 大沼 正人, 古坂 道弘, 原 かおる, 石田 倫教
    日本食品科学工学会誌, 67, 6, 186, 192, 公益社団法人 日本食品科学工学会, 2020年
    日本語, 以上,見てきたように,SAXS測定により食品状態のままの乳製品において,種々のナノ構造が観測できた.得られた結果は以下の通りである.

    ・乳脂肪の鎖長構造として2L構造が低脂肪乳をのぞく,全ての試料で観測された.さらに22 months試料ではでは2L構造に加えて,3L構造が観測された.

    ・多くの先行研究と同様,low fat milk とregular milkでは直径2~3nmのCCPに起因する散乱が観測され,ほぼ同じサイズのCCPがmozzarellaでも観測された.一方,2,6,22 months試料では直径6~17nmの粒子からの散乱が観測された.プロファイル形状の熱安定性も含め,この散乱はCCP起因と考えられ,熟成チーズではCCPの凝集が生じている可能性が高い.

    以上の結果は,これまで食品状態に観測のための加工を加えた試料で観測されてきた結果が食品状態のままの乳製品でも問題なく観測できることを示している.それゆえ,今回得られた個々の情報は既知のものも多いが,原料となる牛乳からチーズまでを全く試料加工なしでナノ構造を観測した初めての例と考えられる.また,mozzarellaおよび熟成チーズでは作製プロセスや熟成期間の違いによると考えられるCCPサイズの差異や体積分率の差異が観測された.

    市販品を対象とした検討では,原料乳や製造プロセスが異なることに起因するナノ構造の差異を排除できない.そこで,液体である乳からチーズに至る凝乳プロセスを詳細に検討する目的で原料乳や作製環境を完全に把握できる環境下で同様な検討を酪農学園大学との共同プロジェクトとして開始している.その結果について今後,随時報告予定である.
  • Change in Charpy impact toughness and carbide precipitation after ageing heat treatment of high Mn austenitic steel
    Keiji Ueda, Daichi Izumi, Toshinori Ishida, Takako Yamashita, Atsushi Takada, Satoshi Igi, Shotaro Yamashita, Tomo Ogura, Kazuyoshi Saida
    Welding International, 34, 7-9, 314, 328, 2020年
    研究論文(学術雑誌), High-Mn austenitic steel is expected to be a next-generation structural material for cryogenic use by maintaining a stable fcc crystal structure even at cryogenic temperature by adding a large amount of C and Mn which are γ-stabilizing elements. In some cases, Cr is added together with C as a solid solution strengthening element to the high-Mn austenitic steel. Depending on the conditions of ageing heat treatment, the formation of Cr carbide may affect the mechanical properties. In this study, the formation behaviour of Cr carbide and the effect on cryogenic Charpy impact toughness in the ageing heat treatment at from 773 to 1273 K for 30 s to 18 ks of a high-Mn austenitic steel with 0.5%C-25%Mn-5%Cr. Regardless of the ageing heat treatment conditions, no cleaved but 100% ductile fracture surface was observed in all samples after the Charpy impact test at 77 K. On the other hand, M23C6 containing Cr was formed on the austenite grain boundaries in the sample aged for a long time at 1073 K, and the Charpy absorbed energy showed lower than those of the other ageing conditions. As the results of both detailed microstructure observation of M23C6 and adjacent austenite matrix and DICTRA simulation, it was clarified that M23C6 mainly act as a fracture initiation point but propagation to the matrix becomes ductile because no sharp alloy deficiency layer is formed at the M23C6/austenite matrix interface. As a result of calculation of stacking fault energy using a thermochemical model, it was confirmed that γ stability at cryogenic temperature could be sufficiently secured even in the alloy-deficient region near M23C6 as well as in the stable matrix.
  • Dominant factors of cryogenic toughness of heat-affected zone of welding in high Mn austenitic steel
    Keiji Ueda, Daichi Izumi, Atsushi Takada, Toshinori Ishida, Satoshi Igi, Shotaro Yamashita, Tomo Ogura, Kazuyoshi Saida
    Welding International, 34, 7-9, 335, 348, 2020年
    研究論文(学術雑誌), High Mn austenitic steel is expected to be a next-generation structural material for cryogenic use by maintaining a stable fcc crystal structure even at cryogenic temperatures by adding a large amount of Mn which are γ-stabilizing elements. In order to clarify the factors governing the cryogenic toughness of heat-affected zone (HAZ) of welds, investigation of relationship between microstructure and Charpy impact toughness of multi-pass welded joint and a simulated thermal cycle test was conducted for high Mn steel containing 0.5%C-25%Mn-5%Cr. In the MAG welding, HAZ near fusion line showed high absorbed energy, whereas it was minimized at 5 mm towards the HAZ side from fusion line reheated up to around 1073 K. Furthermore, in a simulated thermal cycle test of continuous cooling, the absorbed energy was also minimized at 1073 K. On the other hand, in the simulated thermal cycle test of quenching, the inverse dependence of the grain size on a conventional steel was shown, and the toughness increased as the grain size became coarse. Grain growth occurs according to the maximum temperature of HAZ, and M23C6 is formed on the grain boundary in the subsequent continuous cooling process. It was clarified that M23C6 became only initiation site of fracture under Charpy impact loading, and its existence density was the main factor of initiation energy. On the other hand, propagation process is a ductile fracture phenomenon in which γ stability is maintained regardless of the presence of M23C6.
  • Evaluation of Nanosize NbC Precipitates in HSLA Steel through Microstructural Analysis and Small Angle Neutron Scattering
    Haruo Nakamichi, Katsumi Yamada, Kaneharu Okuda, Toshinori Ishida, Masato Ohnuma
    Materials Science Forum, 941, 141, 146, Trans Tech Publications, Ltd., 2018年12月26日
    研究論文(国際会議プロシーディングス), Nano size precipitate morphologies are very important for considering the precipitate hardening mechanism of HSLA steels. Systematic analysis of precipitates from nano scale to bulk scale were carried out using Nb bearing hot rolled steels through transmission electron microscopy (TEM) observations and chemical analysis of precipitates by solvent extraction. A small angle neutron scattering (SANS) experiment was also performed using a Hokkaido Univ. compact neutron source to understand average precipitate size. Results show that both changes in hardness and the amount of precipitates (under 20nm in size) have the same tendency. Precipitate is recognized as NbC plates, which have coherency with the steel matrix by Baker-Nutting orientation relationships. A row of precipitates, formed on the interface between austenite and ferrite during transformation, is also apparent. The SANS profile shows that small size precipitate formation is detected even though the amount of precipitation is small. In addition, the magnetic scattering component of the SANS profile has high sensitivity to NbC precipitates compared with that of the nucleus scattering component. By comparing precipitate data from comprehensive experiments, we consider the relationship between precipitate behavior and the hardening mechanism.
  • Characterization of a nano-scale γ' phase in HPT-disk P/M superalloy HGN300 by small-angle X-ray scattering
    M. Ohnuma, T. Yoshioka, T. Ishida, J. Nishimura, M. Sato, D. Nagahama, M. Okuno
    Minerals, Metals and Materials Series, 2018-June, 339, 351, 2018年
    研究論文(国際会議プロシーディングス), Quantitative evaluation of the size and volume fraction of y' particles has been studied for the first time by Small-Angle X-ray Scattering (SAXS) in the newly developed HGN300 superalloy employing different aging conditions. In addition to γ' particles of about 20 nm in diameter formed during cooling, particles with D (diameter) < 10 nm form on aging. The average size of the y' particles with D < 10 nm increases on prolonging the time at a fixed temperature as well as by increasing temperature for fixed lengths of time. However, their size remains in the range under 10 nm except for the highest temperature and the longest time. The γ' particle volume fraction also increase on increasing the aging time at a fixed temperature but is roughly constant after 24 h of heating, independent of temperature. Ultra Small-Angle Scattering (USAXS) reveals that the volume fraction of γ' particles in the size range from 20 to 100 nm in diameter increase in the early stage of aging, while it decreases in the late stage. These results suggest that the disappearance of the particles in the size range of 20 < D < 100 nm stimulate the formation of γ' particles with D < 10 nm in the single step aging. Comparison with Scanning Electron Microscope (SEM) images indicates that the regions with a low number density of γ; particles in the size range from 20 to 100 nm in SEM images are the sites where the particles with D < 10 nm form. An increase in the number density of γ' particles with 20 < D < 100 nm occurs in the following second step aging and cause an increase of the Vickers hardness. Consequently, statistically representative parameters obtained by SAXS in a larger sample volume than that viewed by direct observations show that the formation pathway of γ' particles with 20 < D < 100 nm after two steps aging is through the dissolution of γ' particles with 20 < D < 100 nm formed during cooling and the growth of newly formed particles with D < 10 nm.
  • Intermediate-angle neutron scattering instrument for quantitative and non-destructive characterization of nanostructures in steels and other alloys
    Toshinori Ishida, Masato Ohnuma, Baek Seok Seong, Michihiro Furusaka
    ISIJ International, 57, 10, 1831, 1837, 2017年
    研究論文(学術雑誌), For characterizing nanostructures embedded in a metallic matrix, a newly designed intermediate-angle neutron scattering (iANS: "irons") instrument has been developed that shortens the distance between the sample and detector and is combined with a time-of-flight (TOF) technique. Since the momentum transfer (Q) resolution can be relaxed to provide an optimum Q-range when we focus on characterizing nanoscale heterogeneity, a much higher neutron flux can be utilized for the measurements than those available in a conventional small-angle neutron scattering (SANS) instrument. Consequently, iANS gives sufficiently high quality profiles for quantitative analysis on an absolute unit scale even using a compact accelerator driven neutron source (CANS). The results obtained at the Hokkaido University Neutron Source (HUNS) are compared to those obtained in large facilities. Some results obtained by iANS, are compared to those obtained by small angle X-ray scattering (SAXS) with respect to SAXS/SANS contrast variation.
  • Dispersion and strength parameter of nano-sized bubbles in copper investigated by means of small-angle X-ray scattering and transmission electron microscopy
    Shi Shi, Naoko Oono, Shigeharu Ukai, Toshinori Ishida, Masato Ohnuma
    Materials Science and Engineering: A, 658, 296, 300, 2016年03月21日
    研究論文(学術雑誌), Nano-sized bubble dispersion in copper was achieved by a powder metallurgy method based on ball milling and spark plasma sintering. The microstructure of bubbles was evaluated by using Transmission Electron Microscopy (TEM), and the bubble size and interspacing were further quantitatively determined from small-angle X-ray scattering (SAXS) measurement. From TEM observation, the average radius of bubbles is 2 nm and their interspacing is 75 nm, while according to SAXS measurement, the radius is found to be 1.5 nm and the interspacing is 54 nm. By combining those parameters with the bubble distribution and Vickers hardness, the obstacle strength factor was evaluated as 0.23 by using TEM result, and 0.16 by using SAXS data. This suggested that bubbles could impede dislocation motion.

講演・口頭発表等

  • X線小角散乱法による冷却速度の異なるAl-Zn-Mg合金の等速加熱による組織形成過程の検討               
    大沼正人, 鈴木朝己, 石田倫教, 福田深, 成田麻未, 吉田英雄
    軽金属学会 第147回秋期大会, 2024年11月09日, 日本語, 口頭発表(一般)
  • ラボサイズX線小角散乱法を用いたA2618合金とA2024合金の高温特性評価               
    福田深, 大沼正人, 石田倫教, 愛須優輝, 田中宏樹, 一谷幸司
    軽金属学会 第147回秋期大会, 2024年11月09日, 英語, ポスター発表
  • Process Dependence of Nanostructure of Real Cheese               
    M. Ohnuma, Y. Nasuda, T. Ishida, H. Fukuda, I. Kaneda, T. Tochihara
    XIX International Small Angle Scattering Conference (SAS2024), 2024年11月07日, 英語, ポスター発表
  • Time Evolution of Nanostructure in Al Alloys with 1 mm Thick Measured by Laboratory High Energy Small-Angle X-ray Scattering               
    M. Ohnuma, S. Fukuda, T. Ishida, S. Kuramoto
    XIX International Small Angle Scattering Conference (SAS2024), 2024年11月07日, 英語, ポスター発表
  • Effect of thermal history on aging behavior of 7000 series aluminum alloys from -10 to 180 °C               
    T. Ishida, T. Suzuki, M. Mihara-Narita, H. Yoshida, S. Kuramoto, M. Ohnuma
    XIX International Small Angle Scattering Conference (SAS2024), 2024年11月07日, 英語, ポスター発表
  • X線小角散乱法によるナノグラニュラー膜の厚さ方向構造評価法の検討               
    長谷川琢斗, 青木英恵, 石田倫教, 増本博, 大沼正人
    日本金属学会 2024年秋期(第175回)講演大会, 2024年09月20日, 口頭発表(一般)
  • ラボラトリX線小角散乱法を用いたAl-Mg-Si合金における異方形状粒子の解析               
    田村涼太, 大沼正人, 石田倫教, アマリナアイナカハルディン, 本間智之
    軽金属学会 第146回春期大会, 2024年05月12日, 口頭発表(一般)
  • DSCとその場SAXSを組み合わせた2000系アルミニウム合金の各時効段階におけるナノ構造の力学特性への影響評価               
    福田深, 大沼正人, 石田倫教, 倉本繁, 伊藤吾朗, 小林純也, 小林郁夫
    軽金属学会 第146回春期大会, 2024年05月11日, 口頭発表(一般)
  • Effect of Alloying Element on Mechanical Properties of High Strength Austenitic Steel               
    K. Ueda, D. Izumi, T. Ishida, Y. Murakami
    International Conference on Processing & Manufacturing of Advanced Materials (THERMEC’2021), 2021年05月, 口頭発表(一般)
  • 高Si含有中炭素マルテンサイト鋼の機械特性に及ぼすFe炭化物の影響               
    寺本真也, 井村政仁, 井村政仁, 増田優起, 増田優起, 石田倫教, 石田倫教, 大沼正人, 根石豊, 鈴木崇久
    日本ばね学会ばね及び復元力応用講演会講演論文集, 2021年
    2021年 - 2021年
  • 高強度オーステナイト鋼溶接熱影響部の靭性支配因子               
    植田圭治, 泉大地, 高田充志, 石田倫教, 伊木聡, 山下正太郎, 小椋智, 才田一幸
    溶接学会平成31年度春季全国大会, 2019年04月, 口頭発表(一般)
  • 高Si含有中炭素マルテンサイト鋼の機械特性に及ぼすFe炭化物の影響               
    寺本真也, 寺本真也, 根石豊, 鈴木崇久, 井村政仁, 井村政仁, 増田優起, 増田優起, 石田倫教, 石田倫教, 大沼正人
    日本鉄鋼協会日本金属学会両支部合同サマーセッション概要集, 2019年
    2019年 - 2019年
  • 高Mnオーステナイト鋼の低温靱性に及ぼすCr添加の影響               
    泉大地, 石田倫教, 植田圭治, 伊木聡
    材料とプロセス(CD-ROM), 2019年
    2019年 - 2019年
  • In-house Small-Angle X-ray and Neutron Scattering for quantitative characterization of nano-size precipitates in steels               
    M. Ohnuma, T. Ishida, M. Furusaka
    6th International Conference on Advanced Steels (ICAS2018), 2018年11月, 口頭発表(一般)
  • Development of the small angle neutron scattering instrument for the compact accelerator driven neutron source               
    T. Ishida, M. Ohnuma, M. Furusaka
    XVII International Small-Angle Scattering Conference (SAS2018), 2018年10月, ポスター発表
  • Further use of small-angle scattering in the industrial materials               
    M. Ohnuma, T. Ishida, M. Furusaka
    XVII International Small-Angle Scattering Conference (SAS2018), 2018年10月, 口頭発表(一般)
  • Evaluation of Nanosize NbC Precipitates in HSLA Steel through Microstructural Analysis and Small Angle Neutron Scattering               
    H. Nakamichi, K. Yamada, K. Okuda, T. Ishida, M. Ohnuma
    International Conference on Processing & Manufacturing of Advanced Materials (THERMEC’2018), 2018年07月, 口頭発表(一般)
  • Characterization of Nano-Scale γ’ Phase in HPT-Disk P/M Superalloys HGN300 by Small-Angle X-ray Scattering               
    M. Ohnuma, T. Yoshioka, T. Ishida, M. Okuno, D. Nagahama
    9th International Symposium on Superalloy 718 and Derivatives, 2018年06月, 口頭発表(一般)
  • Magnified neutron imaging using refractive optics               
    Y. Iwashita, R. Katayama, Y. Fuwa, K. Kino, T. Ishida
    The 7th Meeting of the Union for Compact Accelerator-Driven Neutron Sources (UCANS-VII), 2018年03月, 口頭発表(一般)
  • 強度変調型六極磁石による中性子拡大イメージング               
    岩下芳久, 片山領, 不破康裕, 木野幸一, 石田倫教
    日本物理学会 第73回年次大会, 2018年03月, 口頭発表(一般)
  • 乳製品のナノ構造解析               
    那須田祐子, 大沼正人, 古坂道弘, 古坂道弘, 石田倫教, 石田倫教
    日本食品科学工学会大会講演集, 2018年
    2018年 - 2018年
  • X線小角散乱法による鋼中Fe炭化物の解析(高Si含有高炭素マルテンサイト鋼の機械的特性に及ぼす焼戻し温度の影響 2)               
    井村政仁, 増田優起, 石田倫教, 石田倫教, 大沼正人, 寺本真也, 寺本真也, 鈴木崇久, 根石豊
    材料とプロセス(CD-ROM), 2018年
    2018年 - 2018年
  • 回転楕円体ミラーを用いた小型集束型中性子小角散乱装置の性能評価               
    山田諄太, 武田晋, 石田倫教, 古坂道弘
    日本原子力学会北海道支部研究発表会講演要旨集, 2018年
    2018年 - 2018年
  • Active use of compact neutron source to industrial applications               
    M. Ohnuma, T. Ishida, M. Furusaka, B.S. Seong, S. Koizumi, Y. Noda, T. Minemura
    International Conference on Neutron Scattering 2017 (ICNS2017), 2017年07月, 口頭発表(一般)
  • A compact focusing SANS instrument using a metallic focusing mirror for compact accelerator driven neutron sources demonstrated at the Hokkaido University Neutron Source               
    S. Takeda, T. Hosobata, M. Hino, T. Ishida, J. Yamada, S. Morita, M. Ohnuma, Y. Yamagata, M. Furusaka
    International Conference on Neutron Scattering 2017 (ICNS2017), 2017年07月, 口頭発表(一般)
  • Data Reduction and Instrumentation Towards Accurate Absolute Intensity for the TOF-SANS Instrument (iANS) at the Compact Accelerator Driven Neutron Source at Hokkaido University               
    T. Ishida, M. Ohnuma, M. Furusaka
    International Conference on Neutron Scattering 2017 (ICNS2017), 2017年07月, ポスター発表
  • Performance comparison of time-of-flight SANS and conventional SANS instruments using instrument weighting functions               
    T. Ishida, S. Takeda, Y. Yamagata, M. Hino, A. Sokolova, M. Furusaka
    International Conference on Neutron Optics (NOP2017), 2017年07月, ポスター発表
  • Magnified Neutron Imaging with Modulating Permanent Magnet Sextupole Lens               
    Y. Iwashita, Y. Fuwa, T. Ishida, K. Kino
    International Conference on Neutron Optics (NOP2017), 2017年07月, 口頭発表(一般)
  • 小型加速器中性子源での小角散乱装置開発とそれを用いた金属材料中の析出物の相推定               
    石田倫教, 大沼正人, 古坂道弘
    材料とプロセス(CD-ROM), 2017年
    2017年 - 2017年
  • 回転楕円体ミラーを用いた小型集束型中性子小角散乱装置の性能評価               
    山田諄太, 武田晋, 石田倫教, 古坂道弘
    日本中性子科学会年会講演概要集, 2017年
    2017年 - 2017年
  • 北海道大学におけるSANS装置iANSを用いた金属材料測定の技術開発               
    石田倫教, 大沼正人, 古坂道弘
    日本中性子科学会年会講演概要集, 2017年
    2017年 - 2017年
  • 強度変調磁気レンズによる中性子拡大イメージング               
    岩下芳久, 片山領, 不破康裕, 木野幸一, 石田倫教
    日本中性子科学会年会講演概要集, 2017年
    2017年 - 2017年
  • 金属基板回転楕円ミラーを使用した小型線源用小型集束型中性子小角散乱装置の測定試験               
    武田晋, 日野正裕, 細畠拓也, 石田倫教, 山田諄太, 大沼正人, 山形豊, 古坂道弘
    日本中性子科学会年会講演概要集, 2017年
    2017年 - 2017年
  • X線小角散乱によるNi基P/M鍛造材(HGN200及びHGN300)の微細組織定量化               
    吉岡拓矢, 石田倫教, 西村純, 西村純, 奥野元貴, 長濱大輔, 大沼正人
    日本金属学会講演概要(CD-ROM), 2017年
    2017年 - 2017年
  • Neutron Imaging with Magnetic Lens               
    Y. Iwashita, Y. Fuwa, T. Ishida, K. Kino
    Asian Forum for Accelerators and Detectors 2017, 2017年01月, 口頭発表(一般)
  • X線および中性子小角散乱法による11CrODS鋼の微細組織評価               
    西村純, 大沼正人, 丹野敬嗣, 石田倫教
    日本金属学会講演概要(CD-ROM), 2016年
    2016年 - 2016年
  • 北海道大学中性子源施設(HUNS)小角散乱装置iANSのデータ処理手法開発と金属材料測定の現状               
    石田倫教, 大沼正人, 古坂道弘
    日本中性子科学会年会講演概要集, 2016年
    2016年 - 2016年
  • Nano-size precipitates in steels characterized by Small-Angle Neutron and X-ray scattering               
    M. Ohnuma, D. H. Ping, T. Ishida, R. Hashimoto, M. Furusaka
    Asia Steel International Conference 2015, 2015年10月, ポスター発表
  • HETEROGENEITY IN MARTENSITE PHASE OF STEELS               
    M. Ohnuma, D. H. Ping, T. Ishida, M. Furusaka
    16th International Conference on Small-Angle Scattering, 2015年09月, ポスター発表
  • 小角散乱及び透過型電子顕微鏡による高窒素マルテンサイトステンレス鋼の微細組織解析               
    石田倫教, 大沼正人, 佐藤博隆, 古坂道弘, 平徳海, 阿部太一
    材料とプロセス(CD-ROM), 2015年
    2015年 - 2015年
  • 高窒素マルテンサイト鋼におけるオメガ相析出の可能性               
    大沼正人, 大沼正人, 平徳海, 石田倫教, 古坂道弘
    日本金属学会講演概要(CD-ROM), 2015年
    2015年 - 2015年
  • Small and Intermediate-Angle Neutron Scattering Instruments for Materials Research at a Compact Accelerator Driven Neutron Source               
    M. Furusaka, T. Ishida, S.Takeda, M. Ohnuma, B. S. Seong
    2014 MRS Fall Meeting & Exhibit, 2014年12月, 口頭発表(一般)
  • Characterization of Nano-Size Heterogeneities by In-House Small Angle X-Ray and Neutron Scattering               
    M. Ohnuma, D.H. Ping, M. Furusaka, T. Ishida, B.S. Seong
    2014 MRS Fall Meeting & Exhibit, 2014年12月, 口頭発表(一般)
  • Development of a medium and small-angle neutron scattering instrument iANS optimized for compact accelerator driven neutron source               
    T. Ishida, H. Sato, B. S. Seong, M. Ohnuma, M. Furusaka
    International Collaboration on Advanced Neutron Sources (ICANS-XXI), 2014年10月, ポスター発表
  • X線および中性子インハウス小角散乱法による高窒素マルテンサイトステンレス鋼のナノ析出物相の同定               
    大沼正人, 石田倫教, 大野博久, 古坂道弘, 植田茂紀, SEONG B.S.
    材料とプロセス(CD-ROM), 2014年
    2014年 - 2014年
  • Combined Use of In-House SANS and SAXS for Characterizing Nano-size Heterogeneities in Steels               
    M. Ohnuma, M. Furusaka, T. Ishida, H. Ohno, B. S. Seong
    2013 MRS Fall Meeting & Exhibit, 2013年12月, 口頭発表(一般)
  • Development of a time-of-flight small-and intermediate-angle scattering instrument for a compact accelerator-driven neutron source II. Data correction and application to nanostructure analysis               
    T. Ishida, H. Ono, H. Sato, M. Ohnuma, M. Furusaka
    The 4th Meeting of the Union for Compact Accelerator-Driven Neutron Sources (UCANS-IV), 2013年09月, ポスター発表
  • Development of a time-of-flight small-and intermediate-angle scatteringinstrument for compact accelerator-driven neutron sourceI. Instrument design of iANS               
    H. Ohno, T. Ishida, H. Sato, M. Ohnuma, M. Furusaka
    The 4th Meeting of the Union for Compact Accelerator-Driven Neutron Sources (UCANS-IV), 2013年09月, ポスター発表
  • Impact of In-house Small-Angle Neutron Scattering to the Materials Science               
    M. Ohnuma, T. Ishida, H. Ohno, H. Sato, M. Furusaka
    The 4th Meeting of the Union for Compact Accelerator-Driven Neutron Sources (UCANS-IV), 2013年09月, 口頭発表(一般)
  • 小型加速器パルス中性子源に最適化された中性子小角散乱装置の開発とナノ材料構造解析への応用               
    石田倫教, 大野博久, 佐藤博隆, 大沼正人, 古坂道弘
    日本原子力学会秋の大会予稿集(CD-ROM), 2013年
    2013年 - 2013年
  • 小型加速器パルス中性子源用小角散乱装置におけるデータ補正法               
    石田倫教, 大野博久, 佐藤博隆, 大沼正人, 古坂道弘
    日本中性子科学会年会講演概要集, 2013年
    2013年 - 2013年
  • 小型加速器に最適化された中性子小・中角散乱装置の開発               
    大野博久, 石田倫教, 佐藤博隆, 大沼正人, 古坂道弘
    日本中性子科学会年会講演概要集, 2013年
    2013年 - 2013年

所属学協会

  • 2024年04月 - 現在
    軽金属学会               
  • 2014年 - 現在
    日本中性子科学会               
  • 2014年 - 現在
    日本鉄鋼協会               

産業財産権

  • 溶接継手及びその製造方法
    特許権, 石田 倫教, 仲道 治郎, 泉 大地, 植田 圭治, JFEスチール株式会社
    特願2020-160722, 2020年09月25日
    特開2022-053860, 2022年04月06日
    特許第7385831号, 2023年11月15日
    202303012206675989
  • 鋼材およびその製造方法、タンクおよびその製造方法
    特許権, 泉 大地, 石田 倫教, 植田 圭治, JFEスチール株式会社
    JP2022002735, 2022年01月25日
    特許第7338792号, 2023年08月28日
    202303016700153389
  • 鋼材およびその製造方法、ならびにタンク
    特許権, 泉 大地, 竹内 佳子, 石田 倫教, 仲道 治郎, 植田 圭治, 伊木 聡, JFEスチール株式会社
    JP2021006963, 2021年02月25日
    特許第7272438号, 2023年05月01日
    202303021175193831
  • 溶接継手及びその製造方法
    特許権, 石田 倫教, 仲道 治郎, 泉 大地, 植田 圭治, JFEスチール株式会社
    特願2020-160722, 2020年09月25日
    特開2022-053860, 2022年04月06日
    202203021396302603
  • 鋼材およびその製造方法、ならびにタンク
    特許権, 泉 大地, 竹内 佳子, 石田 倫教, 仲道 治郎, 植田 圭治, 伊木 聡, JFEスチール株式会社
    JP2020010410, 2020年03月11日
    特許第7024877号, 2022年02月15日
    202203001005206027
  • TIG溶接用溶加材
    特許権, ▲高▼田 充志, ▲高▼山 直樹, 黒田 穣, 石田 倫教, 仲道 治郎, 植田 圭治, 山下 賢, 韓 鵬, JFEスチール株式会社, 株式会社神戸製鋼所
    特願2020-553567, 2020年03月19日
    特許第6978615号, 2021年11月15日
    202103013128536030
  • 極低温用高強度溶接継手の製造方法
    特許権, 仲道 治郎, 石田 倫教, ▲高▼田 充志, ▲高▼山 直樹, 植田 圭治, 山下 賢, 韓 鵬, JFEスチール株式会社, 株式会社神戸製鋼所
    特願2020-553549, 2020年03月19日
    特許第6978613号, 2021年11月15日
    202103013415410048
  • 極低温用高強度溶接継手の製造方法
    特許権, 仲道 治郎, 石田 倫教, ▲高▼田 充志, ▲高▼山 直樹, 植田 圭治, 山下 賢, 韓 鵬, JFEスチール株式会社, 株式会社神戸製鋼所
    JP2020012215, 2020年03月19日
    WO2020-203335, 2020年10月08日
    202103005582841627
  • TIG溶接用溶加材
    特許権, ▲高▼田 充志, ▲高▼山 直樹, 黒田 穣, 石田 倫教, 仲道 治郎, 植田 圭治, 山下 賢, 韓 鵬, JFEスチール株式会社, 株式会社神戸製鋼所
    JP2020012214, 2020年03月19日
    WO2020-203334, 2020年10月08日
    202103006486868049